Authorized dealer

Briggs & Stratton generators

ShellShocked Electric is an authorized Briggs & Stratton dealer based in Madisonville, serving Southeast Tennessee. We sell and install standby generators. Licensed and insured. TN License #61900.

Sales and installation

We install automatic standby generators with automatic transfer switches, and generator interlock kits with an inlet box for portable generators. For standby units, we help you choose a unit, size it from a load calculation, install it, and connect the electrical side, including an automatic transfer switch that switches your home over on its own. For portable generators, an interlock kit and inlet let you power the circuits you choose safely, without backfeeding the utility lines.

  • Authorized Briggs & Stratton dealer
  • Standby generator sales
  • Electrical installation with an automatic transfer switch
  • Generator interlock kits and inlet boxes for portable generators
  • Annual and premium maintenance plans
  • Licensed and insured. TN License #61900

Gas and propane hookups are done by a licensed gas partner. ShellShocked Electric does not perform gas work. We handle the electrical side and coordinate with a licensed gas provider for fuel piping and connections.

A Briggs & Stratton PowerProtect standby generator installed on a concrete pad.
A Briggs & Stratton PowerProtect standby generator after installation.
Inside a Briggs & Stratton standby generator, showing the Vanguard engine and control panel.
Inside a standby unit: the engine and control panel.

What to expect

When you request a quote, we set up a site visit to talk through what you want the generator to cover, look at your panel and major appliances, check the installation location, and explain the electrical work involved. Fuel hookups are scheduled with our licensed gas partner.

Never plug a portable generator into a wall outlet. Portable units should be run outdoors, away from doors and windows.

Generator questions

Generator FAQ

Straight answers to the questions we hear most. Every home is different, so we confirm the details at a site visit.

Do I need a generator?

It depends on what an outage costs you. If losing power means no heat or cooling, no water from a well pump, a sump pump that stops, food going bad, or medical equipment that cannot run, a generator is worth a look. Some homeowners only want a few essentials covered; others want the whole house to keep running. We talk through what matters to you at a site visit and give you honest options.

Standby generator or a portable generator with an interlock kit?

We install both. A portable generator with an interlock kit is a manual setup: we install an interlock kit on your panel and an inlet box outside, so when the power goes out you roll the generator out, start it, plug it into the inlet, and switch the breakers over by hand. It has to be refueled while it runs, and it covers the circuits you choose to run.

A standby generator is permanently installed outside your home and runs on natural gas or propane. With an automatic transfer switch, it takes over on its own, even when nobody is home. We will help you decide which setup fits your home and how you want to handle an outage.

What is the difference between an interlock kit and an automatic transfer switch?

Both keep your home's electrical system separated from the utility lines while a generator is running. That prevents backfeed, which can damage equipment and is dangerous for line workers repairing the power lines. We install both.

An interlock kit is a manual device on the panel, paired with an inlet box for a portable generator, and you switch it over yourself. An automatic transfer switch, used with a standby generator, senses when utility power is lost, signals the generator to start, and switches your home over to generator power within seconds. When utility power comes back and holds steady, it switches back and lets the generator cool down and shut off on its own.

What size generator do I need?

We do not size generators from square footage alone. We start with a site visit, look at your panel and your major appliances, such as the heat pump or air conditioner and heat strips, well pump, electric range, dryer, and water heater, and size the generator from a load calculation.

In many homes we add load management, which lets the system manage large appliances so a smaller generator can still run the whole house. We will explain the options and why we recommend the size we do.

What maintenance does a standby generator need?

A standby generator runs a short automatic self-test each week to keep itself ready. Beyond that, we recommend professional maintenance once a year: oil and filter changes, spark plugs, battery check, and a full system check.

We offer an annual maintenance plan, and a premium plan that adds a 6-month check. Ask us about either when we visit.

What warranty comes with a Briggs & Stratton generator?

Briggs & Stratton DX models installed by an authorized dealer include a 10-year comprehensive warranty covering parts, labor, and travel. Standard Briggs & Stratton standby units carry a 7-year comprehensive warranty. Coverage depends on registration and maintenance, and we will walk you through yours.

See energy.briggsandstratton.com for complete warranty details.

Do you handle the gas or propane hookup?

No. ShellShocked Electric does not do gas or propane work. We handle the electrical side of the installation, and the gas or propane hookup is completed by a licensed gas partner. We coordinate with them so the job comes together.

How long does a generator installation take?

Timing depends on the equipment, permits, inspection, and the gas hookup, so we do not promise a set timeline. We will give you a realistic picture of the steps once we have looked at your home.